Architectural Specifications

SECTION 10714: EXTERIOR ACCORDION FOLDING SHUTTERS

PART 1 - GENERAL

1.01 SUMMARY

1. Section includes exterior accordion folding, side stacking Hurricane/security, Accordion Shutter protection.

1.02 SUBMITTALS

1. Product Data: Submit manufacturer’s complete product data for all specified components, including specifications, finish information and installation instructions.
2. Shop Drawings: Submit shop drawings showing layout, sizes and types, product materials, components and accessories, fabrication data, finishes, rough-in dimensions, anchorage and installation requirements and details.
3. Samples / colors: Submit minimum six inch length of blade and track section. Include manufacturer’s standard array of color finishes for selection by Architect.
4. Quality Assurance Submittals:
   1. Certificates: Manufacturer's certification that design criteria meets specified requirements.
   2. Operating and Maintenance Instructions: Submit detailed maintenance requirements and operating instructions.
   3. Warranty: Submit specified warranty documents.

1.03 QUALITY ASSURANCE

1. Installer Qualifications:
   1. Use only manufacturer’s factory trained installers or qualified licensed installers approved by shutter manufacturer.
2. Regulatory Requirements:
   1. Comply with all local and governing code requirements.
   2. Unless required otherwise, fabricate to withstand wind loads that carry same rating as component and cladding of walls.
3. Pre-Installation Conference: Conduct a pre-installation meeting to verify project installation and coordination requirements, field conditions, and manufacturer instructions.

1.04 DELIVERY, STORAGE AND HANDLING

1. Deliver components in manufacturer’s original, unopened, undamaged containers with identification labels intact. Store components protected from harmful weather conditions and damage from other construction activity.

1.05 PROJECT CONDITIONS

1. Field Measurements: Verify actual measurements of openings by field measurements before fabrication. Show recorded measurements on shop drawings.

1.06 WARRANTY

1. Manufacturer’s Warranty: Submit, for Owner’s acceptance, manufacturer’s standard warranty document executed by an authorized company official.
   1. Warranty period: ______________years.

(Specifier Note: Refer to manufacturer’s product data and / or consult with manufacturer’s representative for warranty information / requirements).

PART 2 - PRODUCTS

(Specifier Note: Typically in the following Articles and paragraphs, where items occur in brackets ( ) select item desired for Project).

2.01 MANUFACTURER

1. Roll-a-way, Inc., 10601 Oak St. N.E.,
   St. Petersburg, FL 33716
   (727)576-1143, (800) 683-9505, (888) rollaway
   FAX (727) 579-9410

2.02 COMPONENTS / MATERIALS

1. Shutter System: Provide (Hi-Tech) (Bernardo) shutter system.
2. Shutter Operation: Manual.
3. Shutter Components:
   1. Extruded aluminum components, 6063-T6 alloy. Unless otherwise noted.
   2. Screws and fasteners: Type 304 or 316 series stainless steel.
   3. Provide all required components as necessary for a complete and properly operating installation for the shutter system selected. Required components Include but are not limited to, louver blades, wall header, ceiling header, sill / adjustable sill adapter, roller assemblies with nylon rollers / nylon bushings, sill blade pins, bolts and locking mechanism.
   4. Mounting: (wall mounted) (build-out mounted). (ceiling/floor mounted)

2.03 SHOP FINISH

1. Electro Static Applied paint meeting AAMA 2603
2. Color: ( White) (Ivory) (Bronze) (Beige) (As selected by Architect).

PART 3 - EXECUTION

3.01 EXAMINATION

1. Verify conditions of substrates to determine if acceptable for shutter installation in accordance with manufacturer’s instructions. Correct all unsatisfactory conditions prior to commencing shutter installations.

3.2 INSTALLATION

1. Install track and all shutter components to comply with project shop drawings and manufacturer’s written installation requirements.
   1. Where metal surfaces are in contact with masonry, concrete or dissimilar metals, protect with manufacturer’s recommended isolation coatings or tape.
2. After installation, lubricate, test and adjust shutter components to operate properly and free from distortion.

3.03 CLEANING

1. Clean installed components in accordance with manufacturer’s instructions prior to Owner’s acceptance. Properly remove from the site all debris remaining from this installation.
2. Inadequate surface cleaning will result in corrosion formation & potential structural damage.

3.4 PROTECTION

1. Comply with manufacturer’s recommendations and protect completed shutter installations from damage during remaining construction so as not to void warranty.

END OF SECTION